| DV-MOTOR |
Flows up to 30l/min
Pressures up to 210 bar
|
| Rotary motor mounted valves comprise of a steel spool rotating within a steel body. The position of the spool determines which flow path the oil can take & therefore which direction the motor can rotate. Typical applications are where a manual input is needed to effect starting or stopping of a motor. |
 |
|
|
ADVANTAGES
ROTARY SELECTION OF MOTOR FLOW
Rotary manual control handle provides metering / speed control under a variety of different loadings.
DIRECT MOTOR MOUNTING
Units are designed to flange mount directly onto Danfoss OMP/OMR hydraulic motors.
ROBUST CONSTRUCTION
Valves are nickel plated & the control handle is also fitted with a water exclusion seal.
BSP PORTING
Units are supplied with 3/8" BSP ports at inlet & outlet.
Ordering
DV-Motor-DIV-C
|
Description
Direct motor mounted ( OMP/OMR )
rotary control valve c/w 3/8" BSP ports.
|
Temperature
Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.
Filtering
It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system. |
|
