A GroupHES Company
 



 

Head Office Gloucester

Email
tel:01452 730774
fax:01452 731637

Birmingham

Email
tel:01213272664 fax:01213222488

Durham

Email
tel:01914106619 fax:01914111055

Leeds

Email
tel:01132707295 fax:01132703213

 

 

Catalogue Navigation Menu




 

 

 
Piston Pumps

OPEN LOOP VARIABLE DISPLACEMENT PISTON PUMPS

SD-45

Capacities 25cc-90cc/rev


Speeds up to 3,600rpm


Pressures up to 350bar
Sauer-Danfoss axial piston pumps can be made to vary their displacement, or swept volume, by altering the angle of the swash plate against which the pistons operate. The pump's variable output flow can be controlled by a number of different criteria, by pressure signals fed back to the swash plate control. Typical applications are small drives where the pump's output is required to remain 'off load' or in a standby condition.
 

 

 

ADVANTAGES

SERVO CONTROLLED DISPLACEMENT

SD 45 pumps use a cradle swashplate design which is servo controlled so that precise variations in displacement can be produced with very low operating forces.

MULTIPLE CONTROL OPTIONS

SD 45 series pumps can be supplied with a variety of control options such as pressure compensating, load sensing, torque limiting or 'power on demand.'

MOUNTINGS FROM SAE B TO SAE C

Units are available with SAE mounting flanges plus a choice or radial or axial facing port flanges. Tandem units are also available in certain displacement combinations.

AUXILIARY POWER TAKE OFF MOUNTING FLANGE

All pumps are available with an SAE A rear flange that can be used for mounting an additional services pump.

Ordering

SD-45 25cc


SD-45 30cc


SD-45 38cc


SD-45 45cc


SD-45 57cc


SD-45 74cc

SD-45 75cc

SD-45 90cc

Description

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Define flow, speed, pressure, mounting and control

Temperature

Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.

Filtering

It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system.

 

 

View our latest company news here

Hydraulic Equipment Supermarkets have been awarded the distributorship in England & Wales for the new Magnom Pumpmate. Click here to download pdf file
Click here to request your free 'New' Outline Brochure.

Manufacturers

Sauer Danfoss
Parker Hydraulics
Sterling Hydraulics
Duplomatic
Filpro
Hallite Seals
HSP
Hy-Pro
Rastelli Raccordi
Tecreel
Wika
Webtec