A GroupHES Company
 



 

Head Office Gloucester

Email
tel:01452 730774
fax:01452 731637

Birmingham

Email
tel:01213272664 fax:01213222488

Durham

Email
tel:01914106619 fax:01914111055

Leeds

Email
tel:01132707295 fax:01132703213

 

 

Catalogue Navigation Menu




 

 

 
Gear Pumps

ALUMINIUM FIXED DISPLACEMENT EXTERNAL GEAR PUMPS
TFP 50

Capacities 0.25cc-1.27cc/rev


Speeds up to 8,000rpm


Pressures up to 200bar
Sauer-Danfoss fixed displacement gear pumps displace oil by means of one driven gear & one idler gear meshing together. The two gears displace oil in their gear teeth notches from the suction port to pressure port. The displacement of the gear pump is a combination of the size / diameter of the gear & the width of the gear. Fixed displacement pumps will deliver oil flow in direct relation to their swept volume and their rotational speed.
 

 

 

ADVANTAGES

PRESSURE BALANCED BEARING BLOCK DESIGN

TFP 50 units all incorporate the use of gear shaft bearing blocks that provide pressure balancing against the side face of the gears, so that the pressure produced by the pump actually compensates for the separating forces generated by pump pressure.

MULTIPLE VERSIONS AVAILABLE

Pumps can be coupled together to produce double or triple units. However, the input stage must be capable of transmitting the total pump torque.

TWO HOLE EUROPEAN MOUNTINGS

Units are supplied with a 'European' two hole mounting flange plus a series of shaft options that allow for normal coupling. Alternatively 'tang' drives are also available.

MOTOR DESIGNS AVAILABLE

All capacities of units are available as uni-rotational motors.

Ordering

TFP-50-0.25cc


TFP-50-0.45cc


TFP-50-0.57cc


TFP-50-0.76cc


TFP-50-1.27cc

Description

Group 0.5, 2 bolt euro mount, 6mm
keyed shaft, BSP ports.

Group 0.5, 2 bolt euro mount, 6mm
keyed shaft, BSP ports.

Group 0.5, 2 bolt euro mount, 6mm
keyed shaft, BSP ports.

Group 0.5, 2 bolt euro mount, 6mm
keyed shaft, BSP ports.

Group 0.5, 2 bolt euro mount, 6mm
keyed shaft, BSP ports.

Temperature

Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.

Filtering

It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system.

 

 

View our latest company news here

Hydraulic Equipment Supermarkets have been awarded the distributorship in England & Wales for the new Magnom Pumpmate. Click here to download pdf file
Click here to request your free 'New' Outline Brochure.

Manufacturers

Sauer Danfoss
Parker Hydraulics
Sterling Hydraulics
Duplomatic
Filpro
Hallite Seals
HSP
Hy-Pro
Rastelli Raccordi
Tecreel
Wika
Webtec