ADVANTAGES
FOUR FRAME SIZES AVAILABLE
The four frame sizes of 300 series units cover a vast range of capacities & speeds which can be matched to your particular requirement.
THREE PIECE CAST IRON CONSTRUCTION
Units are manufactured in three piece cast iron section, providing a robust & efficient level of performance.
MULTIPLE VERSIONS AVAILABLE
Pumps can be coupled together to produce double or triple units. The input stage must be capable of transmitting the total pump torque, or a limit will need to be placed on each of the sections power output.
FOUR HOLE EUROPEAN OR SAE MOUNTS
Units can be provided with a variety of SAE or European type mounting flanges and shafts.
Ordering
PGP300-315
PGP300-330
PGP300-350
PGP300-365
|
Description
8cc - 40cc cast iron gear pumps. Define
SAE A or B. Define 2 or 4 bolt mounts.
Define splined or keyed shafts. Define
flanged or threaded ports.
16cc - 65cc cast iron gear pumps. Define
SAE A or B. Define 2 or 4 bolt mounts.
Define splined or keyed shafts. Define
flanged or threaded ports.
21cc - 105cc cast iron gear pumps.
Define SAE A or B. Define 2 or 4 bolt
mounts. Define splined or keyed shafts.
Define flanged or threaded ports.
44cc -148cc cast iron gear pumps.
Define
SAE A or B. Define 2 or 4
bolt mounts. Define
splined or keyed
shafts. Define flanged
or threaded ports.
|
Temperature
Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.
Filtering
It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system. |
|
