Ordering
D-HC-2 12-25
D-HC-2 22-32
D-HC-2 22-50
D-HC-2 45-63
D-HC-2 56-125
D-HC-2 90-125
D-HC-2 90-200
D-HC-2 140-200
|
Description
Tie-rod cylinder 12mm rod with
25mm bore, stroke to order.
Tie-rod cylinder 22mm rod with
32mm bore, stroke to order.
Tie-rod cylinder 22mm rod with
50mm bore, stroke to order.
Tie-rod cylinder 45mm rod with
63mm bore, stroke to order.
Tie-rod cylinder 56mm rod with
125mm bore, stroke to order.
Tie-rod cylinder 90mm rod with
125mm bore, stroke to order.
Tie-rod cylinder 90mm rod with
200mm bore, stroke to order.
Tie-rod cylinder 140mm rod with
200mm bore, stroke to order. |
Temperature
Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.
Filtering
It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system. |
